Accept payments using HitPay Bluetooth readers using HitPay's Android mobile app. You may follow the below instructions to connect and pair to WisePad 3 Bluetooth reader using the HitPay Mobile app.
Step 1: Switch on WisePad 3 Bluetooth reader by tapping on the power button
Step 2: Navigate to Bluetooth Settings on your Android device. Your device should be able to discover the WisePad 3 device serial number starting with WPC as shown below.
Tap on the discovered reader with serial number starting with WPC.
Tip : You can locate the serial number of your Bluetooth card reader by tapping on the power button and scrolling down.
Step 3: After tapping on the discovered reader, click on Pair
Step 4: You will now see the Bluetooth reader as a connected / paired device in your Android Bluetooth settings
Step 5: Launch the HitPay App and Navigate to Settings > Terminal
Step 6: Tap on Discover Readers (Ensure the Bluetooth reader is switched on)
Step 7: Tap on the discovered reader
Note: You will now see the below screen IF a firmware update is required. Once the update progress reaches 99%, you can quit the app and connect to the reader again. If there is no firmware update required, you will see the screen in Step 8 below.
Step 8: You will now see the reader as being in connected status and you are now ready to start accepting payments.