To setup Verifone P400 readers provided by HitPay, please follow the below instructions:
To turn on the Verifone P400, securely plug the P400 connector cable into the port on the bottom of the reader. Plug the power adapter into the connector cable and into a power outlet.
The Verifone P400 automatically turns on when connected to power. In a physical store deployment, leaving the device on for extended periods is expected. If you need to turn the reader off, remove the power source.
Pro tip : Even when it's not in use, leave the Verifone P400 plugged in to receive automatic software updates.
Below screen is displayed when reader is connected to a power source
Because the Verifone P400 is internet enabled, its reader software communicates directly with HitPay over WiFi. The reader must connect to the same WiFi or Mobile Hotspot network, as the network that is connected to HitPay.
Tap on Connect to Wi-Fi when you see the following screen
Select WiFi Network
Enter WiFi Network Password
Reader is now successfully connected and you are ready to accept payments
Refer to the following article to learn on how you can connect reader to HitPay and start accepting payments.